| DYNO PROVEN TO PROVIDE THE LARGEST HORSEPOWER GAINS FOR THE 03-04 FORD MUSTANG COBRA
|
|
|
 STRATEGY
In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for the 03-04 Mustang COBRA.
We have invested many hours evaluating and refining each of the Cobra products on our chassis “dyno”, to ensure that we could develop as much power as possible, as safely as possible.
End result is our now available "Dyno Tuned Options".
Our site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always developing new ways to create more horsepower.
| |
C&L TRUEFLOW Dry-Flo Cold-Air Kit
(03-04 Mustang Cobra)
C&L TRUEFLOW Dry-Flo Cold-Air Kit
Are you looking to upgrade your air system on your cobra? C&L TRUEFLOW Dry-Flo Cold-Air Kit for the 03-04 Cobra.
This new kit is designed to replace everything from the throttle body to the front of the factory mass airflow inlet. C&L TRUEFLOW Dry-Flo Cold-Air Kit is a complete with the TRUEFLOW inlet pipe, C&L 95 MAF, adapter hardware, AEM’s new Dry-Flo air filter assembly and custom heat shield made specifically for the supercharged 03-04 Cobra.
To say that the 03-04 Cobra responds well to the new C&L TRUEFLOW Dry-Flo Cold-Air Kit is an understatement. Your Cobra will pick up an easy 25 hp at the rear wheels with this simple modification. C&L Claims a true gain of about 25 rear wheel horsepower.
Installation time : about 15 minutes. How to : Simply take off the stock air box and the hose clamps securing the factory 90mm mass air meter. The electronics are unbolted with a supplied tool from the factory plastic 90mm mass air meter housing and reinstalled on the new C&L 95mm mass air meter housing. The C&L meter is then clamped to the new C&L TRUEFLOW inlet pipe, and to the AEM Dry-Flo Filter. Bolt-on the new custom heat shield made specifically for the supercharged 03-04 Cobra and you’re done.
|
| Part # |
Year |
Application |
Price |
| CNL10699BP |
03-04 |
C&L TRUEFLOW Dry-Flo Cold-Air Kit- C&L TRUEFLOW inlet pipe
- C&L 95 MAF, adapter hardware
- AEM’s new Dry-Flo air filter
- C&L custom heat shield
|
$ 299.95 |
| CNL10699B |
03-04 |
C&L 95mm Cold-Air Kit- C&L 95 MAF, adapter hardware
- AEM’s new Dry-Flo air filter
- C&L custom heat shield
|
$ 229.95 |
| CNL000715 |
03-04 |
C & L - C&L TRUEFLOW Inlet Pipe
|
$ 129.95 |
| MTB-950092 |
 |
80mm/90/95mm Adaptor (only)- Mounts any 4'' diameter filter or cold air kit
- Works with 95mm / 90mm / 80mm Meters
- Complete with aluminum adapter ring, nuts, bolts, gasket
|
$ 29.99 |
| SNB88-0005 |
 
Click-Here |
S&B’s BLUE OIL Precision Cleaning & Oiling Kit - NEVER OVER OIL YOUR PERFORMANCE FILTER AGAIN
- Click-on "How-To" wrench for video instructions in new window
|
$ 14.95 |
| SNB88-0007 |
Click-Here |
S&B’s RED OIL Precision Cleaning & Oiling Kit - NEVER OVER OIL YOUR PERFORMANCE FILTER AGAIN
- Click-on "How-To" wrench for video instructions in new window
|
$ 14.95 |
Click-On Price to Order
03-04 Mustang COBRA C&L Trueflow Inlet Pipe
|
| It is finally here! We have been hoping C & L would finally release their Trueflow inlet pipe for the 03-04 COBRA. Now COBRA owners now enjoy greater benefits from their vehicle. By eliminating the flexible ridges in the factory rubber inlet pipe and by controlling the inside diameter for consistency the TrueFlow inlet pipe replaces the entire OEM plastic inlet pipe and provides the much-needed dense air charge through the system without awkward restrictive turns and flexible ridges.
C&L inlet pipe installs in less than 10 minutes with a 8mm wrench and a flat head screwdriver. It just doesn’t get any easier than this!
|
Factory assembled and ready to install.
This upgrade is also compatible for those who have already purchased any of our 95mm MAF system or our filter kits, We do not recommend the use of this pipe with solid "cold air" tubes that re-locate the filter into the fender, as they tend to attach to the front of the MAF in a fixed location, and are not likely to properly line up with where our inlet pipe places the air meter
body.
Features :
- Cast aluminum for consistent inside diameter
- HI Temp Silicone Hoses
- Stainless Steel Clamps
Optional :
- Polished Stainless Steel Heat Shield
- Stainless Steel Clamps
- HI Temp Silicone Hoses
- Fits Up To 98mm MAF with Flange
|
| Part # |
Year |
Application |
Price |
| CNL000715 |
03-04 |
C & L - C&L TRUEFLOW Inlet Pipe
|
$ 129.95 |
| MTB-950092 |
|
80mm/90/95mm Adaptor (only)- Mounts any 4'' diameter filter or cold air kit
- Works with 95mm / 90mm / 80mm Meters
- Complete with aluminum adapter ring, nuts, bolts, gasket
|
$ 29.99 |
| SNB88-0005 |
Click-Here |
S&B’s BLUE OIL Precision Cleaning & Oiling Kit - NEVER OVER OIL YOUR PERFORMANCE FILTER AGAIN
- Click-on "How-To" wrench for video instructions in new window
|
$ 14.95 |
| SNB88-0007 |
Click-Here |
S&B’s RED OIL Precision Cleaning & Oiling Kit - NEVER OVER OIL YOUR PERFORMANCE FILTER AGAIN
- Click-on "How-To" wrench for video instructions in new window
|
$ 14.95 |
Click-On Price to Order
03-04, SVT COBRA Generation II FIPK® Intake by K&N
 |
We are proud to announce an exciting new product that works great
And is priced right! RPM now offers the Generation II FIPK® Intake by K&N. This innovative Cool-Air Dam kit is designed
with performance and ease of installation in mind.
You’ll add 30.2 Rear Wheel
Dyno-Tested HP over a stock air intake! With less restriction and more surface area, the Generation II FIPK® Intake by K&N kit is a great source of power. The kit consists of the following; K&N air dam with weather seal,
a 9" conical K&N Premium air filter, mountings hardware and reusable gasket.
K&N's Generation II FIPK® Intake installs in minutes with simple hand tools, and utilizes K&N's High Performance "Street-Legal" Air Filtration Systems for maximum airflow and superior filtration.
Features:
- K&N Premium air filter (reusable)
- K&N air dam with weather seal
- 10 Year/Million Mile Limited Warranty
- Mountings hardware/reusable gasket
- Emission Legal in all 50 US States.
- Easy 30 minute installation
- Everything needed to do the job right
|
| Part # |
How To |
Year |
Application |
Price |
| KNN57-2545 |
|
03-04 |
FORD SVT COBRA Generation II FIPK® Intake by K&N |
$ 149.95 |
| SNB88-0005 |
|
S&B’s BLUE OIL Precision Cleaning & Oiling Kit - NEVER OVER OIL YOUR PERFORMANCE FILTER AGAIN
- Click-on "How-To" wrench for video instructions in new window
|
$ 14.95 |
| SNB88-0007 |
|
S&B’s RED OIL Precision Cleaning & Oiling Kit - NEVER OVER OIL YOUR PERFORMANCE FILTER AGAIN
- Click-on "How-To" wrench for video instructions in new window
|
$ 14.95 |
Click-On Price to Order
|
Aluminum Coolant/Expansion Tank 
Line-Loc / Brake Control Kits 
Stainless Steel Hood Pin Kits 
Synthetic Motor Oil / Gear Fluids 
BIG OVAL Throttle Body (30+hp)
TRUEFLOW DRY-FLO Cold-Air (25+hp)
FIPK® Cold-Air (30+hp)
Cleaning / 
Filter Breather Kits
90/95mm MAF/Adaptor Kit/Hoses
Performance Disc Brake Kits
Stainless Steel Brake Line Kits 
PREDATOR Flash Tuner 
LIVEWIRE Flash Programmer
SPECIAL FORCES Tuning Software 
PRO SERIES Heat Exchanger
SC EXPANSION Tank Upgrade
160º/180º LOW TEMP T/Stats
Gear Sets, 3.73/4.10
Performance Gears, 3.73/4.10
LAKEWOOD BFL® Racing Gear Lubes
DYNO TUNED POWER OPTIONS™
Stage I/II/III Camshafts/Spring
Stage I/II/III Camshafts/Spring
Ceramic Mid-length Headers
Stainless X-Pipe w/without cat
American Thunder Exhaust Kits
True X-Pipe with/without cat
GaugeWorks Pillars and Pods 
2 1/16 inch dia. Gauges
Wideband air/fuel with data-logger
DIRECT-FIRE Modular SuperCoils
Multi-Spark coil-on-plug
Copper / Iridium Spark Plugs 
Performance Spark Plug Kits
™ Nitrous Oxide Systems (35-175 hp)
Boost Coolers 
Tubular K-Member / Coil-Over Kits
PRO-KIT Lowering Spring Kit
Sub-frame Connectors 
Dual-Friction Clutch Kits
Street-Strip Clutch/Flywheel Kits 
Mustang Performance Shifters 
Cobra PRO RIPPER Shifters
Drag Radials / Drag Slicks
){kind=link}