|
|
DYNO PROVEN TO PROVIDE THE LARGEST HORSEPOWER GAINS FOR YOUR 05-09 MUSTANG GT
|
| STRATEGY
In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for the 05-08 Mustang GT 3 Valve Motor.
We have invested hundreds of hours evaluating and refining each of the new 4.6L 3V products on our MD Chassis DYNO, and at race tracks coast to coast to ensure that we would develop as much power as possible, and as safely as possible.
The site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always testing and developing new ways to create more horsepower.
(shown on right) 746 RWHP (823 crankshaft HP) 2005 3V Mustang GT Stock Motor, DiabloSport Tuned F-1A ProCharger Kit! |
|
BBK Cold Air Intake Kits
|
BBK Cold Air Intakes are designed to work with the factory computer as well as with the Diablosport and SCT programmers
BBK Cold Air Intakes delivers as much bang for the buck as our Shelby GT500 Throttle body Upgrade Kit does.
We testing their air kits on dozens of stock 2005-10 Ford Mustang GT with consistent gains of 15-16 rear wheel horsepower with no other add-ons
and the stock computer program. This compares to the the same horsepower noted with C&L brand and C&L tuner.
|
So how does BBK do it without programming?
Simply by utilizing a custom integral mass air housing which is machined into all BBK aluminum castings
utlizing the factory mass air calibrations. BBK engineers have also seen even greater gains with the addition of either the Diablosport or SCT tuners when used with a variety of additional add-ons.
FYI Both Diablosport or SCT provide FREE
built in tuning for BBK Cold-Air Intakes.
|
Features:
- Improves Horsepower and Acceleration.
- NO Computer Re-tune Required.
- Money Saving Reusable Filter.
- Titanium/Chrome/Charcoal Powder Coat Selections.
- 50 State legal - CARB D-245-14
- Installation of this kit is quite simple includes all of the special parts needed and should take no more than 1 hours to complete.
|
BBK Titanium Powder Coat Finish Cold Air Kit
No Tune Required. Unlike other Cold Air Intakes the BBK Titanium Powder Coat Finish Cold Air Intake Kit does not require a computer re-tune.
Reusable Filter. BBK designed the high flow cotton air filter to be reusable. So no need to go out and buy a new filter every few thousand miles.
Just clean the filter, re-oil it, save money, and go!
Titanium Powder Coat Finish. 50 State legal - CARB D-245-14. Installation of this kit is quite simple includes all of the special parts needed and should take no more than 1 hours to complete.
| 
$ 268.50
Click-on Tech Button for Instructions 
|
|
BBK Charcoal Metallic Cold Air Kit
No Tune Required. Unlike other Cold Air Intakes the BBK Charcoal Metallic Powder Coat Finish Cold Air Intake Kit does not require a computer re-tune.
Reusable Filter. BBK designed the high flow cotton air filter to be reusable. So no need to go out and buy a new filter every few thousand miles.
Just clean the filter, re-oil it, save money, and go!
Charcoal Metallic Powder Coat Finish. 50 State legal - CARB D-245-14. Installation of this kit is quite simple includes all of the special parts needed and should take no more than 1 hours to complete.
| 
$ 278.50
Click-on Tech Button for Instructions 
|
|
BBK Chrome Finish Cold Air Kit
No Tune Required. Unlike other Cold Air Intakes the BBK Chrome Finish Cold Air Kit does not require a computer re-tune.
Reusable Filter. BBK designed the high flow cotton air filter to be reusable. So no need to go out and buy a new filter every few thousand miles.
Just clean the filter, re-oil it, save money, and go!
Chrome Finish. 50 State legal - CARB D-245-14. Installation of this kit is quite simple includes all of the special parts needed and should take no more than 1 hours to complete.
| 
$ 328.50
Click-on Tech Button for Instructions 
|
|
S&B FILTERED VALVE COVER BREATHER KITS
|
We are proud to announce the return of a product brought back by popular demand. The S&B Valve cover breathers. The S&B Valve cover breathers
were designed to relieve crankcase pressure, on all mod motor applications and also minimizes oil build up behind throttle body and intercoolers.
|
|
Designed to work with the following vehicles; 03-04 Ford Cobra, 86-08 Mustang, 99-04 Lightning, Harley Trucks, and any Ford Product that utilizes the
standard black screw on oil filler valve cover cap.
Installs in seconds, simply remove oil cap from valve cover and replace with S&B breather of your choice.
Features:
- Provides maximum protection without restricting air flow
- Completely exposed filter element and chrome plated top
- All styles come in two types; Twist on / Clamp-On
- Cleanable and re-usable; oil before use
| 
|

Precision Filter Maintenance Kits (includes oil and cleaner)
S&B Filter's cleaning and oiling solution allows you to maximize the performance and longevity of your high performance filter. S&B Filter's cleaning and oiling
solutions will work on any S&B filter and ALL other high performance filters.
S&B's Precision Cleaning & Oiling Kit allows
vehicle owners to properly maintain their high performance air filters by precisely applying the correct amount of oil.
The clearly marked bottle and easy-to-use applicator allow the user to measure and apply the proper amount of oil for each application.
S&B has conducted extensive testing with the Precision Cleaning Kit to ensure that it can be used on ALL high performance filters available today.
Features and Benefits:
Quickly and accurately restore your high performance air filter to like-new condition.
Works on most high performance air filters brands.
Takes the guess work out of cleaning and oiling your performance air filter.
|
S&B’s BLUE OIL Precision Cleaning & Oiling Kit - NEVER OVER OIL YOUR PERFORMANCE FILTER AGAIN
Click-on Tech Button for "How-To" Vedio 
$ 14.99
|
|
S&B’s RED OIL Precision Cleaning & Oiling Kit - NEVER OVER OIL YOUR PERFORMANCE FILTER AGAIN
Click-on Tech Button for "How-To" Vedio 
$ 14.99
|
|
|
|