|
|
| DYNO PROVEN TO PROVIDE THE LARGEST HORSEPOWER GAINS FOR THE 05-07 MUSTANG GT
|
|
|  STRATEGY
In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for the 05-07 Mustang GT 3 Valve Motor.
We have invested hundreds of hours evaluating and refining each of the new 4.6L 3V products on our MD Chassis DYNO, and at race tracks coast to coast to ensure that we would develop as much power as possible, and as safely as possible.
The site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always testing and developing new ways to create more horsepower.
|
746 HP (823 crankshaft HP) 2005 3V Automatic Mustang GT
with Stock Motor, DiabloSport Custom Tune and F-1A ProCharger Kit!
Click-on car for dyno proof
EIBACH PRO-STREET-S System for the 05-07 MUSTANG GT/V6
PRO-STREET-S:
Now using the very same Eibach technology used in Formula 1 racecars, you an get each corner of your vehicle looking and performing at its very best. Eibach´s exciting new Pro-Street-S, stainless steel-bodied coil-over spring/damper packages allow serious drivers the ability to quickly adjust the ride height and corner weight of each individual wheel, giving them the ultimate in flexibility for precise street and track tuning.
Installation:
The kit includes all required components and hardware for a complete installation.
Tech Notes:
Quick—Adjustable Lowering: from 0.8" to 3.0"
PRO-STREET-S Features:
- High Performance, Eibach Tuned Coil-Overs
- Eibach ERD Racing Dampers and ERS Racing Springs
- Quick—Adjustable Lowering: from 0.8" to 3.0"
- Optimal Damper Tuning for Aggressive Performance
- Rust-Free Stainless Steel Technology
- Units include 1/2 NPT fittings & thermal switch
- Legendary Eibach Suspension Quality and Tuning
|
| EIBACH PRO-STREET-S System |
| Part # |
Year |
Application |
Price |
| EIB3510.711 |
05-07 |
EIBACH PRO-STREET-S System for 05-07 MUSTANG GT/V6 |
$ 999.95 |
| EIB5.81260K |
05-07 |
Alignment Kit Front +/- 1.75 degrees of adjustment |
$ 29.95 |
Click-On Price to Order
Lakewood Industries Adjustable Panhard/Bracket Kit
for 05-07 Mustang GT/Shelby GT500 / V6
We are proud to announce an exciting new product that works great
And is priced right! RPM now offers Lakewood Industries Adjustable Panhard Kit. Designed specifically for the 05-07 Mustang.
Lakewood Industries Adjustable Panhard Kit
is engineered to keep the rear-end centered
and aligned under severe cornering conditions. Manufactured from
thick-wall steel tubing to prevent flex and bending, this rod is also
supplied with durable polyurethane bushings and steel sleeves for
added stability. The adjustable feature allows precise location of the
rear-end housing in relation to the chassis, and compensates for
altered ride heights (lowered). Finished in an attractive corrosion-resistant black
powder coat and complete with grease fittings for easy lubrication.
Easily installs in the stock mounting location without any modifications required, Polyurethane bushings replace the soft factory rubber bushings to provide positive stability, Grease fittings are supplied for ease of lubrication.
Features:
- Fully adjustable “on-the-car” panhard bar
- Includes upper panhard rod support bracket
- Grease fittings are supplied for ease of lubrication
- Installs in stock mounting location without any modifications
- Black powder coated finish for attractive appearance and corrosion resistance
- Installation of this kit is quite simple includes all of the special parts needed and should take no more than 1 hours to complete
|
| Part # |
Description |
Price |
| LAK-20405 |
Lakewood Industries- Adjustable Panhard Kit w/poly bushing and Upper Panhard Rod Support Bracket
|
$ 199.95 |
| BMR-PHR006 |
BMR - HD Tubular Adjustable Panhard Rod
|
$ 134.95 |
| BMR-PHR007S |
BMR - Upper Panhard Rod Support (only)
|
$ 109.95 |
| BMR-PHR008 |
BMR - Pan-Hard Relocation bracket (only)
|
$ 72.95 |
Click-On Price to Order
 |
05-07 MUSTANG (all) PANHARD RELOCATION KIT
It has always been common practice to
reinforce Ford's 8.8" rearend with a stronger, cast rear cover. Unfortunately, with the 05-07 model, the pan-hard rod prevents this.
BMR has an easy solution. BMR relocation bracket moves the drivers side of the pan-hard rod to the back of the OE mount, providing
1" of additional clearance. Installation is simple and rear end geometry remains unaffected.
|
| 05-07 MUSTANG (all) PANHARD RELOCATION KIT |
| Part # |
Description |
Price |
| BMR-PHR008 |
BMR - Pan-Hard Relocation bracket (only)
|
$ 72.95 |
Click-On Price to Order
|
Aluminum Coolant / Fill Tanks 
Stainless Radiator/Fuse Cover kits
BRUTE FORCE DRY-FLO (+18hp)
COLD-AIR Intake (+18hp) 
TRUEFLOW/RACER 85/95mm Cold-Air
S&B Performance Intake Kit (+25hp)
FILTERS
GEN X Manifold & Accessories
Battery Box and Relocation Kit
ERADISPEED Plus Rotors 
PRO SERIES Performance Radiators
LOW TEMP 160 Thermostat 
PREDATOR Tuner (+27hp)
Strategy Flash Tuner
CARBON FIBER Driveshaft
3.73/4.10 Gears
Rear End Girdle and Stud kit 
DYNO TUNED POWER OPTIONS™
Xtreme Cam/Spring Kits (+40 hp)
Stage I/II/III Camshafts/Spring
Stage I/II/III Camshafts/Spring
STROKER 302 Rotating Assemblies 
CERAMIC Long-Tube/Headers
Long-Tube/CAT4WARD® Header
Ceramic Long-Tube Header Kits
SERIES X-Pipe w/wo Cats
Stainless X-Cross off-road Pipes
T-304 Stainless Axle-Back™ Kit
American Thunder Axle-Back™ Kit
A-Pillar Gauge Pods, Dash Bezels 
DIRECT-FIRE 3V Modular SuperCoils
Revolution HT Series Spark Plugs 
/ 
NITROUS OXIDE Kit (75-175 hp)
SuperCharger Kits
FRONT-END Alignment Kit
LAKEWOOD Adjustable Panhard Bar Kit
Precision Sport / QuickSilver Shifters
DFX Clutches / Flywheel Kits
STREET/STRIP Clutch/Flywheel Kits
HURST COMPETITION / Plus Shifter
Street Dual Clutch/Flywheel System