Looking for a product that will make your Trucks converter to improve fuel mileage, performance and durability? TCI® Automotive has the solution to this question!

When you buy a heavy-duty diesel truck, such as the GM Duramax Turbo Diesel, you buy it for strength and performance. Since most of these trucks are used in “work horse” towing and hauling applications, the popularity of bolt-on diesel performance upgrades has skyrocketed. Unfortunately, most owners don’t realize, until it’s too late, that the additional performance from programmers, exhaust upgrades, etc. only highlights the design compromises and weaknesses of the factory torque converter.

Now, thanks to the drivetrain engineers at TCI®, there is a new TruckMaster™ torque converter that yields increased performance, fuel mileage and durability for your GM turbo-diesel truck. Designed as a simple bolt-in upgrade to the factory Allison 1000 transmission, the TruckMaster™ converters are available in both single and multi-disc configurations to fit the demands of your specific application. Additionally, the TruckMaster™ converters are designed to yield a lower-than-factory stall speed, allowing you to fully utilize the tremendous low-end torque of the GM turbo diesel engine. To further address the failure points of the OEM-unit, TCI® utilizes a newly developed composite clutch lining and billet cover to handle the increased demands of common performance upgrades.

• Billet Cover eliminates common failure point of OEM converter
• Lower stall speed provides increased fuel mileage, acceleration & towing muscle
• New composite “lock-up piston” clutch material developed to handle heat associated with demanding towing applications
• Heavy-duty construction & high-quality internal components designed to handle diesel performance upgrades (programmers, exhaust kits, etc)
  
  

TCI® TruckMaster™ Torque Converter
• Single disc, Billet Cover Converter

TCI® TruckMaster™ Torque Converter
• Multi-disc, Billet Cover Converter

It’s a deep subject, but one which every owner of a diesel truck should be thinking about; keeping things cool. TCI®’s new line of high quality, diesel fluid pans do just that by increasing the fluid capacity of the transmission pan. The larger fluid supply and black powder-coated finish increase the heat dissipation, therefore dropping internal transmission temperature 20 to 30 degrees and increasing transmission life. Additionally, this “trick” looking pans are built from aircraft-quality aluminum and feature added cooling fins to further improve cooling.

Every TCI® diesel transmission fluid pan comes ready to install with everything you need to install it yourself. The included magnetic drain plug helps keep loose metal from being circulated through the transmission and the oringed (where applicable) sealing surface ensures against leaks. Pans are available for most common diesel engine applications.

• Increased fluid capacity for maximum cooling
• Magnetic drain plug
• Stainless steel installation hardware
• 1/8” NPT temperature sender port
• Finned aircraft aluminum construction
• Allen wrenches included for installation & service
• O-rings require no gaskets or sealants
• Every pan comes fully assembled with everything needed for installation
  
  

TCI® 1000-series Allison diesel
• Transmission fluid pan holds 10 quarts of fluid

TCI® 2000-series Allison diesel
• Transmission fluid pan holds 10 quarts of fluid

TCI® 2400-series Allison diesel
• Transmission fluid pan holds 10 quarts of fluid

Innovative plate and fin design generates internal turbulence for exceptional heat transfer; Heat has always been the #1 cause of premature automatic transmission failure. The TCI® Max-Cool™ Transmission Cooler is the most effective way to keep your transmission cool and extend its durability and performance. The TCI® Max-Cool™ Transmission Coolers utilize a special “plate and fin” design, which reduces transmission temperatures by 33% over tube-style transmission coolers.

The TCI® Max-Cool™ Transmission Coolers feature pre-drilled mounting plates and 3/8'' push-on fittings to make installation easy and greatly improve durability. Available in sizes from 4'' x 11'' x 3/4'' through 9-7/8'' x 11'' x 3/4'', TCI Max-Cool Transmission Coolers are the most compact, space efficient coolers you can buy today.

• Features highly efficient and innovative “plate and fin” design
  
  
• Reduces transmission temperature by up to 33 percent for added durability
  
  
• Four different compact, space efficient coolers for all popular applications
  
  
• All coolers are 3/4-inch thick
  
  
• Pre-drilled mounting plates and fittings for easy installation
  
  

TCI® Max-Cool™ Transmission Cooler
• 4-inch long x 11-inch high x 1-inch thick

TCI® Max-Cool™ Transmission Cooler
• 6-inch long x 11-inch high x 1-inch thick

TCI® Max-Cool™ Transmission Cooler
• 7-inch long x 11-inch high x 1-inch thick

TCI® Max-Cool™ Transmission Cooler
• 9 7/8-inch long x 11-inch high x 1-inch thick