|
|
| DYNO PROVEN TO PROVIDE THE LARGEST POWER GAINS FOR THE 99-04 SVT LIGHTNING/02-03 HARLEY F-150
|
|
|
STRATEGY
In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for the 99-04 SVT Lightning and 02 - 03 Harley Davidson Truck.
We have invested hundreds of hours evaluating and refining each of the 5.4L engine and chassic products on our own MD-600 Chassis DYNO, and at race tracks coast to coast to ensure that we would develop as much power as possible, and as safely as possible.
End result is our now available "Dyno Tuned Options".
The site menu for the 99-04 SVT Lightning and 02-03 Harley Davidson Truck on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always developing NEW ways to create more horsepower for your vehicle.
| |
NEW Power Options, NEW Exhaust Options, Guaranteed Savings !
TCI®’s Ford Valve Body Improver Kit
Improves
Drivability and Durability
|
Here is another first from RPM Outlet. With all the power that we have developed for our performance packages, we decided to add the TCI transmission valve body improver kit.
What will the TCI transmission valve body improver kit do for you?
The TCI® Valve Body Improver Kit for E4OD/4R100 Ford transmissions incorporates a
metal replacement converter drain back. This component replaces the problematic OE
valve, which can cut off lubrication to the overdrive planetaries if it fails. In addition to
correcting a number of common internal high performance problems, the new TCI®
E4OD/4R100 Valve Body Improver Kit greatly improves shift quality and overall
transmission life.
Will it eliminate converter shudder ?
You bet,kit eliminates converter shudder while reducing wear and heat.
OE transmissions are a compromise at best, delivering only adequate performance for the
masses. Performance enthusiasts can effectively upgrade their Ford E4OD/4R100
transmissions with the installation of TCI®’s new Valve Body Improver Kit. Complete
with everything you need, along with detailed instructions, the TCI® Valve Body
Improver Kit reduces internal transmission slippage and solves internal lubrication
problems. With more positive converter clutch engagement, converter shudder is
removed, increasing durability.
|
Features & Benefits:
- Greatly improves shift
- Removes converter shudder, increasing durability
- Reduces internal transmission slippage
- Incorporates converter drain back
- replacing problematic OE components
- Corrects internal high performance problems
- Complete kit with everything you need, along
with detailed instructions
|
| Part # |
Application |
Price |
| TCI-496500 |
TCI® Valve Body Improver Kit- For the E4OD/4R100 Ford Transmissions
|
$ 89.95 |
Click-On Price to Order
|
TCI® Large Capacity Diesel Transmission Fluid Pan
(E4OD/4R100/5R110)
|
It’s a deep subject, but one which every owner of a diesel truck should be thinking about;
keeping things cool. TCI®’s new line of high quality, diesel fluid pans do just that by
increasing the fluid capacity of the transmission pan. The larger fluid supply and black
powder-coated finish increase the heat dissipation, therefore dropping internal
transmission temperature 20 to 30 degrees and increasing transmission life. Additionally,
this “trick” looking pans are built from aircraft-quality aluminum and feature added
cooling fins to further improve cooling.
|
 |
Every TCI® diesel transmission fluid pan
comes ready to install with everything you need
to install it yourself. The included magnetic
drain plug helps keep loose metal from being
circulated through the transmission and the oringed
(where applicable) sealing surface
ensures against leaks. Pans are available for
most common diesel engine applications.
Features and Benefits:
- Increased fluid capacity for maximum cooling
- Magnetic drain plug
- Stainless steel installation hardware
- 1/8” NPT temperature sender port
- Finned aircraft aluminum construction
- Allen wrenches included for installation & service
- O-rings require no gaskets or sealants
- Every pan comes fully assembled with everything
needed for installation
|
| Part # |
Year |
Application |
Price |
| TCI-498010 |
All |
TCI® E4OD/4R100 Series Power Stroke Diesel- Transmission fluid pan holds 7.5 extra quarts
|
$ 349.95 |
| TCI-508010 |
All |
TCI® 5R110 Series Power Stroke Diesel - Transmission fluid pan holds 7.5 extra quarts
|
$ 349.95 |
Click-On Price to Order
Precision Industries Torque Converter
Everyone who know torque converter, know who makes the best torque converters. Just ask around and you will find that everyone has his or her favorite brand. But when it comes down to who actually does make the “BEST” torque converter, the answer is always the same, Precision Industries. We have used them for years, but like a lot of others have done while looking for a bargain, we switched to a cheaper brand, and tried to get the same results as with the Precision Industries torque converter. AGAIN we learned our lesson. The results were what we expected. You get what you pay for.
With the Precision Industries torque converter the power increase is amazing! You just can't get this kind of performance increase from any other single piece of speed equipment. Your truck is ALWAYS in its power band ALWAYS! With Precision Industries exclusive multi-disc lock up * converter you will never have to worry about transmission overheating or converter failure. This converter is designed for the Supercharger ford 5.4L exclusively.
Precision Industries Torque Converter increases performance by multiplying engine torque. The result is like getting free horsepower. Your supercharged truck will smoke the tires and plant you in the seat like never before! This Torque Converter will lower your 60 ft. time by .2 seconds, and the 1/4-mile time by .5 seconds. Again you just can't get this kind of performance increase from any other single piece of speed equipment. Order yours today, in stock available for same day shipping.
|
 |
The 10 1/2 lock-up 4R100 Lightning converter Features:
- Exclusive multi-disc lock up *
- A Unique Billet Front Cover
- 4130 CNC Machined Turbine Hub
- Sealed Torrington Bearings
- Furnace Brazed Impeller & Turbine
- Anti-Ballooning Plate
- Electronically Balanced
- 50 State Street Legal Will Not Void Factory Warranty
- Full 2 Year Warranty
|
| Part # |
How To |
Year |
Engine |
Application |
Price |
| PER480028 |
 |
99-04 |
5.4L SC |
2800 rpm Multi-Disc 3 plate converter * |
$ 949.95 |
Click-On Price to Order
Moroso 4+ Qt. Aluminum Deep Sump Transmission Pan
As the undisputed leader in oil pan technology, Moroso now offers a premium quality Transmission fot your Lightning, Harley,
and Powerstroke powered Vehicle. Unlike heavier cast versions , Moroso Transmission pans are fully fabricated entirely
from lightweight aluminum and feature a one-piece billet rail to ensure leak free sealing. Precise CNC manufacturing and
TIG welding prevent distortion for a perfect fit every time.
Don’t let some one talk you into a “factory” extra capacity transmission pan. Factory pans are not aluminum and are not
capable of dissipating heat under light or even moderate loads. Moroso Transmission pans include an Oil drain fitting
with magnetic drain plug and pan mounting hardware consisting of steel studs and convenience. Pan gaskets, filter are not included and must be purchased separately. This Kits uses Motorcraft Filter Part No, FT113.
Act now to secure your order on this limited time offer. Available while supplies last.
|
 |
Features
- Holds 4 More Quarts!
- Fabricated entirely from lightweight aluminum
- Precise CNC manufacturing and TIG welded
- One-piece billet rail to ensure leak free sealing
- Built-in magnetic drain plug For Clean Safe Oil Changes
- Pan mounting hardware consisting of steel studs and nuts
- Easy 1 hour installation
- Detailed instructions included
|
| Part # |
Part Description |
Price |
| MOR42050 |
Moroso lightweight aluminum Deep Sump Transmission Pan- 4+ Qt. Fabricated lightweight aluminum Deep Sump Transmission Pan (cnc)
- Magnetic Drain Plug
- This kits requires the uses of Motorcraft filter part no, FT113
|
$ 159.95 |
Click-On Price to Order
|
Line-Loc (brake-control) kit
Synthetic Motor Oil / Gear Fluids 
BIG OVAL Billet Single Blade (8+hp)
TRUEFLOW Cold-Air Intake Kit (25+hp)
FIPK® Cold-Air (15+hp)
Cleaning / 
Filter Breather Kits
Battery Box and Relocation Kit
PREDATOR Flash Tuner 
LIVEWIRE Flash Programmer
SPECIAL FORCES Tuning Software 
PRO SERIES Heat Exchanger
SC EXPANSION Tank Upgrade
160º/180º LOW TEMP T/Stats
Rear End Girdle and Stud Kit
BOLT-ON Driveshaft Safty Loop
LAKEWOOD BFL® Racing Gear Lubes
Performance Gears, 3.73/4.10
DYNO TUNED POWER OPTIONS™
Stage I/II/III Camshafts/Spring
Stage I/II/III Camshafts/Spring
STAGE II/III Cyl. Heads
CAT4WARD® Shorty Header Kit
Stainless 2-Cat Mid-Pipe 
Ceramic Coated Header Kit
off-road/2-Cat Mid-Pipe
American Thunder Exhaust Kits
HI-FLOW Catalytic Converters
GT 40 Supercar Fuel Pumps
GaugeWorks Pillars and Pods 
2 1/16 inch dia. Gauges
Wideband air/fuel with data-logger
Multi-Spark coil-on-plug
DIRECT-FIRE Coil-on-Plug (CoP) Kit
Blaster Coil-on-Plug (CoP) 
Copper & Iridium Spark Plugs 
Performance Spark Plug Kits
™ Nitrous Oxide Systems (35-175 hp)
Boost Coolers 
Drag/Street Adjustable Shock Kits
PRO-KIT Complete Lowering Kits
Drag Radials / Drag Slicks
Breakaway™/Streetfighter™ Converters