IMPORTANT! READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION.

1. Remove air filter assembly.

2. Remove four throttle body-retaining bolts from the throttle body.

3. Lift the throttle body unit, discarding the old gasket. Clean both mounting surfaces. be careful and prevent any debris from falling into the intake manifold!

4. Install the MotorVator with upper and lower gaskets. Bolt throttle body onto the MotorVator with the washers and longer bolts provided.

5. Reinstall air filter assembly.

Parts List #5110
1 MotorVator
2 Gasket
4 5/16" x 3.25 bolts
4 5/16" lock washers