RPM Outlet
RPM Outlet - The Best Source For Late Model Aftermarket High Performance Parts ®
Free Shipping on Orders Over $99*
main menu MAIN MENU
rpm outlet shopping cart
shop by vehicle
featured in

rpm outlet magazine

MSD Ignition coils HIGH PERFORMANCE HIGH FLOW CATALYTIC CONVERTERS


Emissions Legal High Flow Catalytic Converters

Have you been looking for a true 49 states emissions legal catalytic converter that would increase horsepower and torque along with keeping the emissions at a OBDII Compliant level. Your search is over Check it out these low flow restriction, compact size, high-flow, stainless steel catalytic converters!


These power packed mini converters are packed in a small and compact polished stainless steel housing, and weight only 2.0 pounds. Higher than factory converter flow rates (as much as 54%) when and most after market converters. long.

All this performance weighs a mere 2.5 lbs and measure only 11” installed, they only take up 7” in length. Rated at 4,500 lbs capacity, Seamless case design makes for a sturdy converter that wont rattle. Stainless steel construction resist corrosion and extends the lifespan of the product.

FYI: These High Flow Ceramic/Metallic Catalytic Converters are 49 states emissions compliant and will pass in most states emissions testing procedures. However, check your local and state ordinances for installation and usage regulations.


pypes cvm10k
    PYPES Polished T409 Stainless Ceramic Mini-Cats
  • Ceramic substrate construction, Polished stainless steel housing
  • Universal 2.5" OD and ID design, installed length 7' long
  • 49 State OBDII Compliant universal catalytic converter
  • Includes welded 02 bung/plug and single stainless band clamp
  • Sold as a Pair (Includes 2 Cats)
    FYI:Ceramic substrate supports 500+RWHP.


Part#
PYP CVM11K



Spun Metallic Converters (49-state legal)

Are Looking to gain horsepower but worried about failing emissions testing?
Magnaflow's engineers have taken the challenge and developed a revolutionary new compact catalytic converter design for use in tight places.

Magnaflow fabricated their metallic converter from a single CNC-formed laser-welded tubular section, which is then spun into a 5" round converter body shape. Each converter is literally manufactured around the Metallic catalyst, which is securely tucked inside, and necks down to thicker gauge material at the inlet/outlet for maximum durability. Converters contain the properly loaded Metallic catalyst for optimum CFM and are OBDII 49-state compliant for engines up to 6.2L of displacement.

Note: These catalytic converters are no longer legal for sale in the state of California and will not be shipped to the state of California.

MagnaFlow Catalytic Converter
    MagnaFlow Short Center Spun Metallic Spun-Mini-Cat
  • Metallic substrate construction for maximum CFM flow
  • Universal 3.00" OD and ID design, installed length 5-¾' long
  • 49 State OBDII Compliant universal catalytic converter
    FYI:Metallic substrate support 6.2L and 700+RWHP.


Part#
MAG 51659
$ 109.50
MagnaFlow Catalytic Converter
    MagnaFlow Short Center Spun Metallic Mini-Cat
  • Metallic substrate construction for maximum CFM flow
  • Universal 2.50" OD and ID design, installed length 5-¾' long
  • 49 State OBDII Compliant universal catalytic converter
    FYI:Metallic substrate support 6.2L and 700+RWHP.


Part#
MAG 51656
$ 109.50
MagnaFlow Catalytic Converter
    MagnaFlow Short Center Spun Metallic Mini-Cat
  • Metallic substrate construction for maximum CFM flow
  • Universal 2.25" OD and ID design, installed length 5-¾' long
  • 49 State OBDII Compliant universal catalytic converter
    FYI:Metallic substrate support 6.2L and 700+RWHP.


Part#
MAG 51655
$ 109.50
MagnaFlow Catalytic Converter
    MagnaFlow Short Center Spun Metallic Mini-Cat
  • Metallic substrate construction for maximum CFM flow
  • Universal 2.00" OD and ID design, installed length 5-¾' long
  • 49 State OBDII Compliant universal catalytic converter
    FYI:Metallic substrate support 6.2L and 700+RWHP.


Part#
MAG 51654
$ 109.50



Ceramic Converters (49-state legal)

Magnaflow Direct Replacement Catalytic Converters
Magnaflow's engineers have taken the challenge and developed a revolutionary replacement catalytic converter designed for use emmissions required vehicles.

Magnaflow fabricated their ceramic converters in either 2.25 / 2.5 / 3.0in. Inlet/Outlet, 9in. Body; 13in. Overall; 6.5in. Wide; Single O2 port and are OBDII 49-state compliant for engines up to 6.2L of displacement.

Note: These catalytic converters are not legal for sale in the state of California.

magnaflow catalytic converter

    MAGNAFLOW Stainless Ceramic Mini-Cat Includes stainless steel heat shield
  • Ceramic substrate construction, Oval stainless steel housing
  • Universal 3.0" OD and ID design, installed length 9' long
  • 49 State OBDII Compliant universal ceramic catalytic converter
  • Includes welded 02 bung/plug and stainless heat shield
    FYI:Ceramic substrate supports 550+RWHP.


Part#
MAG 94139

    MAGNAFLOW Stainless Ceramic Mini-Cat Includes stainless steel heat shield
  • Ceramic substrate construction, Oval stainless steel housing
  • Universal 2.5" OD and ID design, installed length 9' long
  • 49 State OBDII Compliant universal ceramic catalytic converter
  • Includes welded 02 bung/plug and stainless heat shield
    FYI:Ceramic substrate supports 550+RWHP.


Part#
MAG 94136

    MAGNAFLOW Stainless Ceramic Mini-Cat Includes stainless steel heat shield
  • Ceramic substrate construction, Oval stainless steel housing
  • Universal 2.25" OD and ID design, installed length 9' long
  • 49 State OBDII Compliant universal ceramic catalytic converter
  • Includes welded 02 bung/plug and stainless heat shield
    FYI:Ceramic substrate supports 550+RWHP.


Part#
MAG 94134


Need a Oxygen Sensor Simulator or MIL Eliminator? Click Here



Stainless Steel Exhaust Band Clamps

Made in the USA, patented stainless band clamps are great for applications that require frequent un-installs. Smooth transition taper allows proper fit to seal expanded slip-fit connections. These are great for mufflers, tailpipes, merge pipe, and cat converter connections.

All stainless preformed/and flat band clamps and are easy to install and disassemble,along with icreased sealing unlike U-clamps style clamps. Preformed/and flat band clamps band allows for the use of O.D. components (exhaust pipe) to I.D. components (muffler, converters).

Unique design won't crush pipes, assuring smoother exhaust flow. Pre-attached Grade 8 bolts included for easy installation.
pypes exhaust clamps
    Featuring
  • Stainless steel material withstands high temperatures and provides better looks.
  • Easier to install than competitive styles.
  • Pre-attached hardware for easy installation.
  • Grade 8 bolts for high temperature durability.
  • Unique design won't crush pipes.


Stainless Steel
Band clamp 3.00-in Dia.

Part#
PYP HVC24


Stainless Steel
Band clamp 2-½-in Dia.
Part#
PYP HVC21
shop by vendor
SCT TUNER
DIABLOSPORT
Sniper Tuning
HURST SHIFTERS
AUTOMETER GUAGES
Weapon X Coils
royal purple
M&H Tires
Meziere




gift card






RPM OUTLET © Copyright 2012- RPM Outlet All rights reserved. Any unauthorized duplication of any portion of this site strictly prohibited

*Shipping and Handling is Free on orders over $99 in the contiguous 48 United States. AK,HI,PR, US Territories, International, and Canadian orders are excluded.