What's an underdrive pulley?

An underdrive pulley is a replacement pulley that bolts up the same as stock, but has a different size (ratio) and material specifications intended to free up lost horsepower. By increasing the diameter of each accessory pulley and decreasing the size of the crank pulley, the speed at which the accessories are turning relative to engine RPM decreases.

Under drive pulleys do not add power to the engine, they free up the power that is normally wasted on overdriven accessories. The theory is that a larger pulley will drive the accessories slower thus reducing their parasitic horsepower loss. No more power total, but more power sent to the wheels. As an additional benefit, the reduction in wear (less usage) on the accessories due to the lower duty cycles can extend the life of these parts.

For example, the alternator, power steering, water pump and air compressor rob horsepower from the engine. By replacing factory-sized harmonic balancer pulley with the MOTOBLUE resized SFI. approved 20% reduction 7 rib crank pulley and harmonic balancer, the accessories are slowed, resulting in more horsepower available to the drive wheels.

MOTOBLUE™ H.O. Series pulleys will increase horsepower up to 12 RWHP, and increase mileage by 1 to 2 MPG. MOTOBLUE H.O Pulleys are manufactured from billet steel, exceeding factory quality and are the only 20% Reduction 7 Rib crank pulley and harmonic bBalancer available on the market today that is a direct replacment.

Installation: The kit includes all required components and hardware for a complete installation.

Tech Notes: Use of harmonic balancer puller/installer tool required for factory harmonic balancer removal.