Snow Performance Methanol Injection | 1999-2004 Lightning / Harley

Snow Performance Methanol Injection


For Your 1999-2004 Lightning / Harley


Choose Your Stage Package


Stage 1 Boost Cooler


Vehicle:
1999-2004 Lightning / Harley


Features:

  • Boosted Applications Only
  • 300 PSI UHO (Ultra High Output) Pump
  • 3 Quart Reservoir
  • All Tubing Necessary for Installation
  • Boost Switch (1-15 PSI)
  • Pig Tail Harness
  • Level Switch Upgrade
  • 1 Nozzle Holder / Check Valve Combo
  • 2 Hyper-Sonic Nozzles
  • Installation Hardware
  • Snow Performance Running S Decal
  • Snow Performance 1-Year Warranty
  • Difference between stage 1, stage 2, and stage 3?
  • Accessories / Upgrades Click Here

Stage 1 Boost Cooler

The Stage 1 Boost Cooler uses an adjustable boost switch to inject a fixed amount of water-methanol into the system until the boost drops below the switch set point.

Click Tech Button for Install Sheet

Note: For applications above 1,000 HP please call so we can order you custom injectors.


Stage 2 Boost Cooler

(Injected According To Boost Pressure)

Vehicle:
1999-2004 Lightning / Harley


Features:

  • Boosted Applications Only
  • 300 PSI UHO (Ultra High Output) Pump
  • 3 Quart Reservoir
  • All Tubing Necessary for Installation
  • VC-50 Gauge Controller
  • Pig Tail Harness
  • Level Switch Upgrade
  • 1 Nozzle Holder / Check Valve Combo
  • 2 Hyper-Sonic Nozzles
  • Installation Hardware
  • Snow Performance Running S Decal
  • Snow Performance 1-Year Warranty
  • Difference between stage 1, stage 2, and stage 3?
  • Accessories / Upgrades Click Here

Stage 2 Boost Cooler

The Stage 2 Boost Cooler uses a progressive gauge style controller, that proportionally injects more or less according to boost pressure to ensure user control. Users will set what psi for when the injection should be starting and the psi for when the injection should be at full flow.

Click Tech Button for Install Sheet

Note: For applications above 1,000 HP please call so we can order you custom injectors.



Stage 2 MAF / MAP

(Injected According To MAF / MAP Output)

Vehicle:
1999-2004 Lightning / Harley


Features:

  • Boosted and Naturally Aspirated Applications
  • 300 PSI UHO (Ultra High Output) Pump
  • 3 Quart Reservoir
  • All Tubing Necessary for Installation
  • MAFU Progressive Controller for Use With All MAF / MAP Sensors
  • Pig Tail Harness
  • Level Sensor Upgrade
  • 1 Nozzle Holder / Check Valve Combo
  • 2 Hyper-Sonic Nozzles
  • Installation Hardware
  • Snow Performance Running S Decal
  • Snow Performance 1-Year Warranty
  • Difference between stage 1, stage 2, and stage 3?
  • Accessories / Upgrades Click Here

Stage 2 MAF / MAP

The Stage 2 Boost Cooler uses a MAFU progressive controller, that proportionally injects more or less according to MAF / MAP output, which is best suited for vehicles making instantaneous boost and naturally aspirated applications. Users will set the beginning and full flow injection based of the output of MAF / MAP signal.

Click Tech Button for Install Sheet

Note: For applications above 1,000 HP please call so we can order you custom injectors.


Stage 3 Boost Cooler (Boost / EFI)


Vehicle:
1999-2004 Lightning / Harley


Features:


Stage 3 Boost Cooler (Boost / EFI)

Snow Performance′s Stage 3 Boost Cooler is one of the most advanced systems Snow Performance Offers for EFI vehicles. This Stage 3 kit creates a 2D injection map based off of the boost and fuel injector pulse width. This allows for accurate tuning and user control.

Note: For applications above 1,000 HP please call so we can order you custom injectors.



The main function of water / methanol injection is to provide chemical intercooling. Detonation is suppressed so that more power-producing boost and timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol also cools while acting as a very high octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion.